Published at Monday, February 19th, 2018 - 02:41:57 AM. Kitchen Sink. By Jany Pap.
Another way to secure the sink is to use epoxy. A bead of epoxy is placed around the under side of the sink's lip. You can also place a bead of epoxy around the edge of the sink hole. Drop the sink in the hole and make sure you have a flush seam all the way around. If part of the sink is not flush, use the brackets under the counter to pull it down and secure it. If you do have a flush seam, it means you have a very smooth and level counter surface. If this is the case, you can use just epoxy to mount the sink and may not need any screws and brackets underneath. In either case, be sure to allow the epoxy to dry for the amount of time shown on the packaging. Do not touch the sink at all during this period.
A vanity sink is one that is installed into cabinetry. The most common types of installation for a vanity sink are drop in and under mount. A drop in vanity sink is one that fits into a hole cut into the counter top. The hole is slightly smaller than the rim around the top of the sink so that it sits comfortably on the counter top. This type of installation is best if the counter tops you are using do not have finished edges. The sink will hide the cut edges of the counter. The second type of installation can be utilized if you have marble or granite counter tops that have finished edges. The sink is mounted under the counters so you will see the sides of the counter where the hole has been cut. These sinks are most appropriate for larger bathroom where you will need storage. Most of the time there just isn't room for a cabinet in a small powder room.
Any content, trademark’s, or other material that might be found on the Tamara Kuzminski website that is not Tamara Kuzminski’s property remains the copyright of its respective owner/s. In no way does Tamara Kuzminski claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.